ACM5004-G
Enterprise Grade Cellular Routers
|
|
| Model: |
ACM5004-G |
ACM5004-G-E |
ACM5004-G-I |
ACM5004-GV |
| 3G-GSM/UMTS |
✓ |
✓ |
✓ |
- |
| 3G-CDMA/EV-DO |
- |
- |
- |
✓ |
| Digital I/O |
- |
✓ |
✓ |
- |
| High Volt DO |
- |
- |
✓ |
- |
| RS232 |
4 |
4 |
4 |
4 |
| RS422/485 |
- |
- |
✓ |
- |
| Ethernet |
1 |
1 |
1 |
1 |
| USB |
1 |
1 |
1 |
1 |
| Operating Temp |
5 - 50°C |
5 - 50°C |
-35 to 74°C |
5 - 50°C |
General Features
|
|
| Connectors |
4 RJ-45 serial ports (2400 to 230,400bps). Cisco compatible RJ-45 pinout
1 RJ-45 10/100Base-T primary Ethernet port
1 External USB-2 expansion connector
1 external 3G cellular aerial
ACM5004-G-E:
4 TTL level digital I/O ports. 5V max @ 20mA
Dry contacts for 4 external water /smoke / motion sensors
ACM5004-G-I:
2 TTL level digital I/O ports. 5V max @ 20mA. Also provides contacts for external water /smoke/ motion sensors
2 High-Voltage digital output ports (>5V to <= 30V@ 100 mA)
Dual SMA antenna connectors - for either receive diversity [AUX] or [GPS] |
| Power |
External power source +9V to 30 VDC or 9V to 24 VAC
Also supplied with 110-240V AC to 12VDC external power adapter (for operations up to 50° C only)
Power Consumption less than 6W
ACM5004-x-SDC: (48V DC option available all models)
External 36-72V DC to 12V DC external power converter
ACM5004-G-I:
Screw terminal block or barrel connector
|
| Dimensions |
4" x 3.5" x 1 1/8"
(10.2 x 8.8 x 2.8 cm)
Wall and rack mount bracket
ACM5004-G-I:
Also includes DIN rail mount |
| Environmental |
Ambient operating temperature: 5°C to 50°C (41 to 122°F)
Non operating storage temp: -30 to +60°C (-20 to +140°F)
Humidity: 5% to 90%
Internal temperature sensor
ACM5004-G-I:
Ambient operating temperature: -35° to 74° C (-31° to 165° F)
Non operating storage temp: -40° to 85° C (-40 to 185° F)
|
| Wireless Certifications |
PTCRB, NAPRD.03, R&TTE, EN 301 511, A-Tick (GSM/UMTS)
CDG TIA/EIA-690, CDG TIA/EIA-98-E (CDMA/EV-DO)
|
| Emissions |
FCC Part 15 Subpart B Class A Radiated Emissions 30MHz – 1000MHz
ICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz – 1000MHz
AS/NZS CISPR 22: 2004 Class A Radiated Emissions 30MHz – 1000MHz
EN55022: 1998 + A1: 2000 + A2: 2003 Class A Radiated Emissions 30MHz – 1000MHz
|
| Immunity |
EN55024: 1998 +A1: 2001 +A2: 2003
IEC61000-4-2: 1995 ESD 8kV Air Discharge (Direct), 4kV Contact Discharge (Direct/Indirect)
IEC61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
IEC61000-4-4: 1995 EFT/Burst 1.0kV Power Lines, 0.5kV I/O Lines
IEC61000-4-5: 1995 Surge Immunity 1.0kV Common Mode, 1.0 kV Differential Mode
IEC61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
IEC61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods) |
| Isolation |
Serial Port: 4 kV ESD protection on RS232 and RS422/485 transceivers
Ethernet Port: 1500 VAC isolation shielded with shield connected to chassis ground for
signal integrity and ESD protection
|
| Other Agency Approvals |
CE
UL 1950
TUV
C-Tick
RoHS compliant
Security features to support NERC CIP standards
FIPS 140-2 Validated Module Certificate #1051 |
| CPU |
250Mhz Micrel KSZ8692 ARM9 System on Chip
|
| Memory |
32MB DDR RAM
16MB Embedded Flash |
| Operating System |
Linux with source code access
Custom development kit (CDK)
|
Wireless Specifications
Opengear ACM5000 cellular routers operate either on the 3G CDMA/EV-DO or the 3G GSM/UMTS network:
| 3G-GSM/UMTS | ACM5004-G, ACM5004-G-E, ACM5004-G-I |
| Air Interface |
EDGE, GPRS, GSM, HSDPA, HSUPA
Quad-band for global connectivity; Supported networks include ATT, T-Mobile (USA), Telstra & Optus (Australia);
User provides SIM Card
|
| Frequency Bands |
850/900/1900/2100 MHz WCDMA Power class 3 (+24dBm); 850/900 MHz GSM/GPRS/EDGE GSM Power class 4/EDGE E2; 1800/1900 MHz GSM/GPRS/EDGE GSM Power Class 1/EDGE E2; GPS/1575.42 MHz
|
| Data Services |
850/900/1900/2100 MHz WCDMA (HSDPA and HSPA) Downlink up to 7.2 Mbps Uplink up to 5.76 Mbps; 850/900/1800/1900 MHz GSM/GPRS/EDGE Downlink up to 236 Kbps Uplink up to 236 Kbps
|
| 3G-CDMA/EV-DO | ACM5004-GV |
| Air Interface |
Dual-band
ACM5004-GV supports Verizon network
|
| Frequency Bands |
Dual Band; 800MHz North American Cellular band; 1900MHz North American PCS band
|
| Data Services |
CDMA 1xEV-DO Revision A (IS-856-A) Forward link up to 3.1 Mbps Reverse link 1.8 Mbps; CDMA 1xEV-DO Rel 0(IS-856) Forward link up to 2.4 Mbps Reverse link 153.6 Kbps CDMA 1xRTT (IS-2000) Forward and reverse link speeds up to 153.6Kbps
|
- Opengear cellular products by default work in packet switched (PSD) mode across the public Internet or telco managed IP-WANs. By default they do not operate in circuit switched (CSD) mode like a dial-up modem and answer data calls. However expert users/developers can program them to operate in CSD mode for legacy applications.
- To use an Opengear cellular product you need a corporate mobile data service/plan (and a SIM card for GSM) from your telco provider with a public (static or dynamic) IP address. If your plan only provides a private IP address which is not visible across the Internet:
- you can deploy a VCMS or CMS6100 at the central location which will provides a gateway to remote cellular units
- these cellular devices can also be accessed over corporate VPNs using IPSec or OpenSSL
For more details faq377-Public-IP.html
- Access to remote cellular devices is via a secure browser (HTTPS), secure terminal emulators (SSH)
- Opengear’s SDTConnector SSH tunnelling software enables access specific network services (RDP, VNC, SOL, KVM over IP)
- Opengear cellular products also support M2M applications, serial COM port redirection (PortShare), serial bridging and digital I/O control
- Managed devices on the Opengear device’s private network can be securely IP accessible from VPN clients or the corporate VPN
|
|
|
