The IM/IMG console servers are available with a selection of alternate RJ45 pinouts. These must be specified in the part number at the time of order. By default all product ships standard with Opengear Classic pinout:
- The IM4216-2 and IM4248-2 console servers are available with three RJ45 pinout configurations (standard Opengear Classic, Cisco or Cyclades).
- The IM4208-2 gateway offers a choice selection of two RJ45 pinouts (standard Opengear Classic or Cyclades)
- The IMG4216-25 gateway offers a choice selection of two RJ45 pinouts (standard Opengear Classic or Cisco)
These alternate pinouts need to be specified in the part number at the time of order. To order an IM4248-2 dual power supply AC USA model, specify:
- IM4248-2-DAC-US - for a unit equipped with standard Opengear Classic RJ pinouts
- IM4248-2-DAC-US-01 - equipped with Cyclades RJ pinouts (rolled cable connection)
- IM4248-2-DAC-US-02 - equipped with Cisco RJ pinouts (straight through cable connection)
Opengear Classic RJ45 pinout
Opengear's console server products by default have the RJ45 pinout shown below:
 |
|
 |
|
| PIN | SIGNAL | DEFINITION | DIRECTION |
|---|
| 1 | RTS | Request To Send | Output |
| 2 | DSR | Data Set Ready | Input |
| 3 | DCD | Data Carrier Detect | Input |
| 4 | RXD | Receive Data | Input |
| 5 | TXD | Transmit DataCTS | Output |
| 6 | GND | Signal Ground | NA |
| 7 | DTR | Data Terminal Ready | Output |
| 8 | CTS | Clear To Send | Input |
|
Cyclades RJ45 pinout (option -01)
Easy to replace Cyclades products, for use with rolled RJ-45 cable.
|
|
 |
|
| PIN | SIGNAL | DEFINITION | DIRECTION |
|---|
| 1 | RTS | Request To Send | Output |
| 2 | DTR | Data Terminal Ready | Output |
| 3 | TXD | Transmit Data | Output |
| 4 | GND | Signal Ground | NA |
| 5 | CTS | Clear To Send | Input |
| 6 | RXD | Receive Data | Input |
| 7 | DCD | Data Carrier Detect | Input |
| 8 | DSR | Data Set Ready | Input |
|
Cisco RJ45 pinout (option -02)
Straight through RJ-45 cable to equipment such as Cisco, Juniper, SUN, and more...
|
|
 |
|
| PIN | SIGNAL | DEFINITION | DIRECTION |
|---|
| 1 | CTS | Clear To Send | Input |
| 2 | DSR | Data Set Ready | Input |
| 3 | RXD | Receive Data | Input |
| 4 | GND | Signal Ground | NA |
| 5 | GND | Signal Ground | NA |
| 6 | TXD | Transmit Data | Output |
| 7 | DTR | Data Terminal Ready | Output |
| 8 | RTS | Request To Send | Output |
|
